Clone-A-Pussy Plus Sleeve DIY Casting Kit

The Clone-A-Pussy Plus Sleeve Kit is the original patent-pending DIY vulva casting kit that lets you replicate your favourite vaginal lips and turn the result into a fully functional masturbation sleeve — all from home. Using an algae-based molding powder, you press the supplied container firmly against the vulva, hold for one to two minutes while the mixture solidifies, then fill the finished mold with hot pink, 100% body-safe silicone. After a full 24-hour cure, the hardened replica slides into the included case and locks together with an internal pleasure sleeve, giving you a completely personalised sex toy with real stroking sensation. Every component — molding powder, silicone, case, sleeve, water-based lube, molding containers, and easy-to-follow instructions — is included in the box so nothing extra is needed to get started.

Clone-A-Pussy Plus Sleeve Kit features:

• Body-safe silicone: 100% body-safe, hot pink-coloured silicone for the finished replica
• Algae-based molding powder: skin-safe molding medium that sets in one to two minutes
• Pleasure sleeve: attachable internal sleeve converts the replica into a functioning masturbator
• Protective case: rigid case houses the replica and sleeve and doubles as a storage unit
• Water-based lubricant: compatible lube included for comfortable use
• Molding containers: purpose-made containers for clean, accurate casting
• Easy-to-follow instructions: step-by-step guide included for first-time casters

Specifications / Size & material

• Material: Body-safe, coloured silicone (replica); algae-based molding powder (mold)
• Silicone colour: Hot pink
• Body safety: All materials stated as 100% body-safe
• Kit contents: Molding powder, silicone compound, molding containers, pleasure sleeve, case, water-based lube, instructions
• Molds per kit: One — additional supplies required for multiple replicas

Intensity & Experience Level

Level: Beginner | Sensation: Customisable / tactile-creative

This kit is explicitly rated for curiosity and experimentation — fun to try and highly rewarding for first-timers, though the multi-step DIY process means patience and a steady hand are helpful. The end result is a personalised stroker rather than an intensely specialised sensation device, making it accessible and low-pressure for new explorers.

Who is this product for?

• Long-distance partners: people who want a tangible, personalised intimacy tool that bridges physical distance.
• Body-positive creatives: individuals who value self-expression and want to celebrate or explore their unique anatomy through art and intimacy.
• Beginner toy users: those curious about DIY sex toys and hands-on sexual exploration who want a guided, all-in-one kit.
• Gifting romantics: partners looking for the most personalised novelty gift imaginable — complete with function and fun.
• Solo experimenters: anyone interested in the full process of creating and using a custom masturbator as a solo creative project.

How to use the Clone-A-Pussy Plus Sleeve Kit?

1. Prepare your space: lay down towels or a disposable mat, gather all components, and read through all instructions before starting so timing is clear.
2. Trim and position: trim pubic hair if fine mold detail is important, and lightly lube the rim of the molding container to make removal easier. Use a mirror if working alone for accurate placement.
3. Mix the mold: combine the algae-based molding powder with water as directed. Work quickly — the mixture sets fast, so have your position planned and your pose practised before you mix.
4. Make the mold: press the molding container firmly against the vulva and hold completely still for one to two minutes while the mixture solidifies. This is your comfort checkpoint — ensure you or your partner is in a supported, comfortable position before beginning.
5. Remove the mold: carefully pull the container away. Minor imperfections are a normal and charming part of the handmade process.
6. Pour the silicone: fill the finished mold with the hot pink body-safe silicone compound and leave undisturbed to cure for a full 24 hours.
7. Build your toy: once fully cured, insert the hardened replica into the case and attach the internal pleasure sleeve. Warm the sleeve with water for a more realistic feel (avoid overheating).
8. Stop / release step: if at any point during the molding stage the position becomes uncomfortable or the mixture feels too warm, remove the container immediately and allow the skin to breathe before attempting again.

Techniques & ways to play

• Between the thighs (solo or partnered): nestle the assembled case between soft surfaces or thighs for simulation that mimics natural positioning.
• Edge of bed (solo): place the toy at the edge of a mattress while standing or kneeling for hands-free thrusting stimulation.
• Missionary resting (solo): set the toy on a stacked towel or pillow for a top-down stroking angle.
• Partner-assisted casting: involve a partner in the mixing and pouring process — it becomes a playful, bonding activity and their steadier hands can help with timing and placement.
• Dom/sub dynamic: the partner whose anatomy is cast holds creative control over the finished object; agree on how and when the toy is used together before the casting session begins, and check in before escalating to use.

Pairs well with / Complete the scene

• Water-based lubricant: one bottle is included, but a larger supply of any water-based lube is recommended for ongoing use with the sleeve.
• Toy cleaner spray: a dedicated sex toy cleaner makes post-use hygiene quicker and easier.
• Lint-free storage pouch: an additional pouch keeps the replica dust-free if you prefer not to store it assembled in the case.
• Masturbators & Strokers collection: explore other sleeve-style toys to compare sensations alongside your custom replica.
• DIY & Novelty collection: browse other creative intimacy kits for couples and solo explorers.

How to clean and care

• Cleaning: wash the vulva replica and pleasure sleeve with warm water and mild soap, or a dedicated sex toy cleaner, after every use.
• Submerging: avoid submerging the entire assembled kit in water — disassemble first if a thorough rinse is needed.
• Drying: allow all silicone parts to air dry fully; avoid aggressive towelling as it can wear down the surface detail of the replica.
• Lubricant compatibility: use water-based lubricants only — silicone-based lubes can degrade silicone surfaces and ruin the texture.
• Storage: store in a cool, dry place inside the included case or a lint-free pouch. Keep away from sharp objects and other silicone toys to prevent sticking, distortion, or damage. Storing assembled helps protect the shape and keeps internal textures clean.

Additional information

• One mold per kit: each kit produces a single replica — purchase additional kits or supplies if you want multiple casts.
• Handmade character: the final appearance of the replica may include minor imperfections, which are a natural and charming result of the DIY process.
• Dual-purpose process: the casting session itself can be a meaningful solo activity or a fun, connecting experience shared with a partner.
• Custom-fit sensation: because the mold is taken from a real body, the finished toy is completely unique — no two replicas are identical.
• Versatility: once assembled, the sleeve functions like any standard masturbator, offering familiar stroking sensations through a completely personalised toy.

Special considerations / warnings

• Mobility: the casting process requires remaining in one position for approximately two minutes — plan for physical comfort and use supportive props or a partner if needed.
• Dexterity: mixing and pouring the components requires steady hands and careful timing. Consider involving a partner if fine motor control is a challenge.
• Timing is critical: the algae-based molding powder sets quickly — read all instructions fully before mixing, and have your position and space ready before you begin.
• Surface protection: use a towel or disposable mat under the casting area to protect surfaces and simplify cleanup.
• Heat warning: warm the sleeve with water only — do not boil or overheat silicone components.
• Silicone-on-silicone storage: keep the silicone replica away from other silicone toys in storage to prevent the surfaces from bonding or distorting.
• Skin sensitivity: if you have known skin sensitivities or allergies to silicone or algae-based materials, review ingredient details with the manufacturer before use.

18+ only. For consensual adult use.